top of page
Installation Page Hero Banner Image.png

INSTALLATION & SUPPORT

GET YOUR EZ CRUISE INSTALLED WITH CONFIDENCE

Use the official installation video and written instructions to guide your setup from start to finish. Installation involves wiring and mechanical work, professional installation is recommended.

WATCH FIRST

EZ CRUISE INSTALLATION GUIDE

Watch the installation walkthrough before getting started, and follow along as you install your EZ Cruise system.

BEFORE YOU BEGIN

GET READY TO INSTALL

Review the Full Instructions

Read the complete written installation instructions before starting any work.

Watch the Full Video

Watch the complete installation walkthrough before beginning your install.

Confirm Compatibility

General, and XPEDITION models with electronic throttle control.

Review Safety Information

Review the full Safety Information & Legal Disclaimer before installing or operating the system.

Professional Installation Required

Per the official instructions, professional installation is required. Installation involves electrical wiring and brake system work.

Installation Guide Section.png

THE COMPLETE REFERENCE

FOLLOW THE COMPLETE INSTALLATION GUIDE

The detailed installation instructions are the complete reference for installing EZ Cruise on your Polaris, covering power connection, unit mounting, brake switch installation, throttle pedal connection, and control wiring.

GENERAL OVERVIEW

WHAT INSTALLATION INVOLVES

A general overview based on the official instructions. Specific steps vary by machine, always follow the complete written instructions for your model.

01

Connect Power at the Bus Bar

Locate your machine's bus bar and connect the buck converter's red and black wires to the appropriate posts, the exact method depends on your bus bar style.

02

Mount the EZ Cruise Unit

Find a secure mounting location under the dash, near the throttle pedal, and connect the unit to the buck converter.

03

Install the Brake Switch

Route the brake switch wires to the brake master cylinder, install the included brake switch at the forwardmost brake line, and bleed the brake system.

04

Connect the Throttle Pedal

Route the throttle pedal plugs and connect the EZ Cruise unit in-line between the machine's throttle pedal and its factory connector.

05

Wire the Controls

Mount and wire the SET CRUISE button and the SPEED UP/DOWN switch, then verify correct operation before final mounting.

This overview is based directly on EZ Cruise's official installation instructions, which note that specific steps vary by machine. Always refer to the complete written instructions during installation.

LET'S TALK

BEFORE YOU INSTALL, KNOW THE SYSTEM.

Review the full Safety Information & Legal Disclaimer alongside the installation instructions before beginning any work.

INSTALLATION SUPPORT

HAVE QUESTIONS DURING INSTALLATION?

If you run into a question while installing your EZ Cruise system, reach out, we're happy to help clarify anything in the instructions.

ezcruise@gmail.com

Full written installation instructions

Full installation video walkthrough

FAQ

INSTALLATION QUESTIONS

READY WHEN YOU ARE

READY TO GET STARTED?

Shop EZ Cruise, or reach out if you have questions before you buy or install.

bottom of page